How to sideload Android OTA updates on your Google Pixel

There are various ways of getting your Google Pixel cell phone updated to the latest available patch or Operating System. 

Assuming that you are glad to take control over issues, you can skirt the stand by sideloading OTA update on your Google Pixel, and we will tell you how.

Fortunately, the whole process is very easy and keeping in mind that a lot of Android fans will know precisely what to do, not every person is as proficient at getting their smartphones updated. 

First and foremost, there are a couple of differences in the sort of updates you can do on your Android telephone.

Regular or Monthly updates are gradual with full updates held for significant releases. 

In this case, an OTA or “over-the-air” update can be streaked without hardly lifting a finger and will not restore any of your application or system settings when applied. 

To return to a past Android version, you will need a “factory reset.”

How to Go Back from Android 12 to Android 11 on Google Pixel?

How to sideload Android OTA updates on your Google Pixel


To revise, there are a couple of ways of getting your Pixel update to the latest authority Google OTA update – you can delay until your phone gets a notice which will provoke you to download any waiting updates on your phone. 

You can also drive your phone to “pull” any holding up updates by;

  1. Go to Settings.
  2. In the setting menu, click on System.
  3. There you will see System Update.
  4. Finally, click on Check For Updates.

This cycle is pretty easy and should be possible when a pop-up confirms that an update is available. 

In any case, similar to the OTA notification technique, it tends to take some time before records are available.

The speediest way to get the latest update on your Google Pixel is to side-load the official OTA record. 

Google offers various ways of doing this. However, both depend on access to a computer or laptop.

It is also significant that this technique will work for practically all Android devices.

However, you should get the access OTA files for your particular device manufacturer before endeavoring to sideload using this technique.

Step by Step Instructions to Side-load Android OTA Updates On Your Google Pixel

  1. Download and install Android SDK Platform-Tools bundle
  2. Select USB debugging
  3. Download the latest OTA record for your device
  4. Boot your Pixel into Recovery mode
  5. Go to ADB side-load
  6. Connect your cell phone to a laptop or computer with ADB tool installed
  7. Enter the sideload command
  8. Reboot your phone

How to Enable USB Debugging On Your Google Pixel?

First and foremost, make sure that you have Developer Options enabled on your Google Pixel. 

You can do so by following these simple steps:

  • Go to your phone’s settings.
  • Then, click on About Phone.
  • After that, simply click on Build Number. There you will see a message that assures that you have Developer options activated.

Now, you will need to go to Settings and then to System. In system, selected Advanced and then Developer choices (you might have to grow a secret menu for this). 

Look down to the “Debugging” area and tap the “Allow USB troubleshooting” choice. 

It is likewise significant that to minimize again anytime, you might need to enable “OEM unlocking.”

But,  it is essential to take note of that you can in any case sideload OTA updates on your Pixel without this choice being enabled.

How to Download the Latest OTA File On Your Google Smartphone?

Before you try to sideload an OTA file to your Google Pixel, you will require a couple of things. 

For starters, we really want the latest OTA update that is available for your particular Google Pixel phone. Google has every one of the authority works for every Pixel on the dedicated site.

It is critical to pick the right OTA file for your Google Pixel, as this technique will fall flat on the off chance that you try to install the erroneous version for your gadget. 

You can observe OTA files with dates and transporter explicit forms for each Pixel launched here for every gadget (with codenames) underneath:

  • Google Pixel: sailfish
  • Google Pixel XL: marlin
  • Google Pixel 2: walleye
  • Google Pixel 2 XL: taimen
  • Google Pixel 3: blueline
  • Google Pixel 3 XL: crosshatch
  • Google Pixel 3a: sargo
  • Google Pixel 3a XL: bonito
  • Google Pixel 4: flame
  • Google Pixel 4 XL: coral
  • Google Pixel 4a: sunfish
  • Google Pixel 4a 5G: bramble
  • Google Pixel 5: redfin
  • Google Pixel 5a: barbet
  • Google Pixel 6: oriole
  • Google Pixel 6 Pro: raven
Related   Best SIA Wallet & What exactly is the Siacoin Wallet?

How To Boot Your Google Pixel In Recovery Mode?

To start the process you will have to boot your Pixel into Recovery mode. This mode essentially enables the sideloading process to occur. 

To get to recovery mode, shut down your Google Pixel. Then, at that point, hold down on the Power button and the Volume down button at the exact same time until you get to the Bootloader page.

Using the volume buttons to navigate, look down to Recovery mode. 

To choose this option simply click the power button. Then again, assuming that you have your Google Pixel connected to Type-C USB to a laptop or computer, you can use the reboot recovery order:

Windows: adb reboot bootloader

Macintosh: ./adb reboot bootloader

You should see a more modest Android resting with an exclamation mark over it. At the point when this screen is showing, press the Power button and the Volume up button for about one minute to completely enter Recovery mode. 

Pressing the Volume up button will send you directly into Recovery mode.

How To Navigate To ADB sideload?

Using the volume buttons once more, look down to “Apply update from ADB” and select this option with the help of the power button. 

This will send off a blank screen with a message guiding you to sideload an OTA.

How To Connect Your Google Pixel To A Computer or Laptop With ADB Tools Installed?

If you have followed the above-mentioned steps to install ADB tools on your laptop or computer and put them in a folder or drive, then, at that point, you can  connect your cell phone to your laptop or computer assuming you have not previously done as such.

You will have to open a Command Prompt or Terminal window inside the folder or directory where you have saved the stage platform-tool files.

A speedy technique here is to find the right folder and type “cmd” into the address bar on Windows, or shift and tap “Open PowerShell window here”. 

PowerShell is pretty much the same as the Command Prompt, so do not stress a lot as it works regardless.

However, you will have to use the Mac-specific commands here.

Assuming you are using a Mac and have put the platform tools folder and type: “./disc work area” hit Enter and then “./cd stage devices”.

To check if your Pixel is perceived and connected simply enter:

Windows: adb device

Macintosh/Powershell: ./adb device

Given that you have connected your cell phone properly, a serial number will appear with different details to affirm it has been connected securely. 

You may see a brief on your Pixel screen to “Allow USB debugging”.

How To Enter The Sideload Command On Google Pixel?

However, as long as everything is set up, you can now sideload the OTA files. On Windows, make your Command Prompt is associated to the ADB tools folder and type in:

Windows: adb sideload

Macintosh/Powershell: ./adb sideload

You will then, at that point, need to insert the file name of the first .zip folder that you downloaded from Google and hit enter to begin the OTA sideload process on your Google Pixel. 

Assuming everything is working appropriately, you should see some dialog box on your laptop or computer and handset that shows the process of the sideload and installation process. 

This may take some time and in some uncommon cases, the process can come up short. Assuming that it does, simply start the process again as it can take d multiple tries for reasons we actually do not completely know.

When the OTA is finished installing, you will be back to Recovery Mode. 

The last step to bounce into the new update is to choose the Reboot Now option with your power button. 

When your smartphone has rebooted, you need to be securely updated with the latest OTA.

A basic way for checking on the off chance that you have followed these means accurately and sideload the OTA files is to go to Settings and then to About and then to Android version. 

This needs to be on the specific version that you have sideloaded, showing that you have effectively figured out how to finish the process.

And with that, we have now come to an end to our article on How to Sideload Android OTA updates on your Google Pixel. We hope that this article helps you in the best possible manner with regards to that. 

Also Read: Google maybe bringing iPhone X like gesture navigation with Android P

Leave a Comment